Substitute Reception in Printer's Memory
The printer prints the received fax automatically by default. And furthermore, the printer stores the received fax in its memory. When the faxes are stored in the printer's memory, the FAX Memory lamp is lit or flashes.
In the following conditions, the received fax is not printed automatically, only is stored in the printer's memory. (Substitute Reception) Then Received in memory is displayed at the Fax standby screen.
-
When Do not print is selected for Received documents in Auto print settings under Fax settings
-
An error has occurred on the printer:
If you select Print for Received documents in Auto print settings under Fax settings, a received fax will be printed automatically. However, if any of the following errors occurs, the received fax will not be printed. It will instead be stored in the printer's memory.
When the error is resolved, the fax stored in the printer's memory is printed automatically.
-
Paper has run out:
Load paper, then press the OK button.
-
A different size of paper from that specified by Page size in FAX paper settings is loaded:
Load the same size of paper as that specified by Page size, then press the OK button.
-
-
You pressed the Stop button to cancel printing of a fax:
Press the FAX button to resume printing of the fax.
Important
-
When the printer's memory is full, the faxes stored latest overwrite those stored earliest. However, the unprinted faxes are not overwritten.
-
If the printer's memory is full with the unprinted faxes, the printer cannot receive the faxes. Check the FAX Memory lamp regularly, print the faxes, and delete them from the printer's memory.
-
If you unplug the power cord, all faxes stored in the printer's memory are deleted. The next time you turn the printer on, press the OK button after a confirmation screen is displayed. The list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed.
Information on Received Faxes
By default, received faxes will be printed immediately after they are received.
In addition, faxes will be stored in the printer's memory automatically when they are received.
However, the printer's memory has an upper limit on the number of faxes or subjects it can contain. When the amount of stored fax reaches the upper limit of the printer's memory, faxes stored latest will overwrite those stored earliest.
As long as paper is loaded, the printer will perform printing even when the ink remaining is insufficient. Therefore, in case ink remaining is low, printed faxes may be unclear due to blurring of ink. In such case if the amount of stored faxes has reached its upper limit of the printer's memory, faxes stored in the printer's memory will be deleted in order from the earliest. As a result, you may not be able to see faxes either using printed material or the printer's memory.
Therefore, if you use the fax capabilities, make sure sufficient ink remains in the ink tank in advance. In addition, we recommend you refill the ink tank early so that ink does not become insufficient while fax printing is in progress. Visually inspect the remaining ink in the printer's ink tank.
Moreover, we recommend you check printed pages immediately after faxes are received. If a fax remains in the printer's memory, you can reprint it after refilling the ink tank.
If [Do not print] is selected for [Received documents] on [Auto print settings] under [FAX settings] on the operation panel of the printer, received faxes will not be printed immediately. Instead, faxes are stored in the printer's memory automatically and you can select and print those stored from the printer's memory. In this setting, the printer does not receive faxes if the printer's memory reaches its upper limit. Thus, stored faxes are not overwritten automatically.
